|
Page |
Chapter |
Adjustment |
|
Content |
|
Content adjustment |
|
4 |
1.6 |
Adjust block/rail surface symbol |
|
7 |
1.7 |
Table1.7.2 Add H class for Interchangeable type |
New▶ |
7 |
1.8 |
Surface treatment |
|
8 |
1.8 |
1.Add "flange type & without flange type" above the drawing
2."Add "Recommended size of block lock bolt" to the table
3. Change the size indication of Lb
|
|
8~42 |
|
The chapters after Chapter 1.8 are all moved backward back one |
|
15 |
1.12.5 |
1.Add Calculation formula for Height deviation in lateral direction((e2)、Flatness in top mounting plane(e3)
2.Change the 500 value in the schematic to X or Y
3.Change the names of items e2 and e3 in the form to fe2 and fe3
4.Delete note
5.Adjust description
6.Adjust form data |
|
19 |
1.15.7,1.16 |
fs>fm |
|
27 |
1.21.3 |
Add "oil type:DIN 51517 CLP 或 CGLP " |
|
34 |
1.27 |
Modify the temperature description
Modify the surface treatment description for harsh environments |
|
35 |
1.28 |
Add joint rail description
Add "T Trivalent Chromium" to the surface treatment of the rail |
|
36 |
1.29 |
Add joint rail description
Add "T Trivalent Chromium" to the surface treatment of the rail
Add "H" class for the accuracy |
|
37 |
1.3 |
Add "H" class for the accuracy(The table in Note 3 adds H-class preload) |
|
58 |
3.2 |
Add "Product specification" |
|
58 |
3.3 |
The original 3.2 structure is moved backward to the 3.3 structure |
|
59 |
3.4 |
The original 3.3 advantages are moved backward to 3.4 advantages |
|
60 |
3.5 |
1. The original 3.4 Accuracy Standard is moved backward to 3.5 Accuracy Standard
2.Add the corresponding symbols of C and F to the figure
3.Add Running parallelism to the table
|
|
60 |
3.6 |
1.The original 3.5 preload is moved backward to the 3.6 preload
2.Add Z2, preload value and description to the table
|
New▶ |
61 |
3.7 |
Add "Suggestion in Assembly" |
New▶ |
62 |
3.8,3.9 |
Add " 3.8 running resistance", "3.9 lubrication" |
|
63 |
3.1 |
The original 3.6 Product overview is moved backward to the 3.10 |
|
64 |
3.11 |
The original 3.7 Ordering key of System is moved backward to 3.11 |
|
65 |
3.12 |
The original 3.8 Ordering key of Rail is moved backward to 3.12 |
|
65 |
3.13 |
The original 3.9 Ordering key of Block "is moved backward to 3.13 |
|
66 |
3.14 |
The original 3.10 Dimension of Linear Guide is moved backward to 3.14 |
|
68 |
3.14.2 |
Add dimensions and data for wide type of size 7、9、12 |
|
69 |
|
Add dimensions and data for wide type of size 7、9、12 |
|
67~85 |
|
Because two pages are inserted, the original page is moved backward two pages |
|
86 |
6.1.2 |
6.1.2.1 Delete grinding type of ball screw maximum axial clearance
6.1.2.2 Delete "grinding type of ball screw maximum axial clearance "
6.1.2.3 Delete "inner circulation spring force reference value"
Figure 6.1.1.1 The symbol E+T in the Lead Accuracy curve is changed to E
|
|
87 |
|
6.1.2.4 Delete "Plastic cycle spring force reference value" |
|
|
|
6.1.2.5 Delete "Reference value of outer circulation spring force" |
|
88 |
6.13 |
Move forward to page 86 |
|
90 |
6.1.4.2 |
C0~C3 specifications are deleted from the Permissible ranges of torque variation rates |
|
94 |
6.2.3 |
2. Remove highly muted words for dm.n values |
|
104 |
6.5.3 |
Delete precision grade screws in the table |
|
110 |
6.7 |
Delete grinding grade specification of ABBA ball screw size chart |
|
111 |
6.8 |
Ball screw specification definition>
■ Delete C3 for Accuracy grade、wording changes
■ DeleteG grade
■ Delete preload P2、P3
|
|
112~125 |
|
Adjust ball crew data |
New▶ |
117 |
|
Add FSS type |
New▶ |
121 |
|
Add FPA type |
|
125~ |
|
Because of the addition of two screw specifications, the following pages are all two pages moved backward |